Siemens SIMOTION D4x5-2 DP/PN Operating Instructions Manual page 422

Parameters
11.9 TLS
P249 Maximum deviation cylinder
Maximum deviation cylinder
Default: 650 [mm]
Access code: 0
P250 Zero position cylinder A
Zero position that is stored by the "Save zero position" function (control bit "save_zero").
This cylinder position can be approached by means of the "Go to zero positions" function
(control bit "move_zero").
Default: 900 [mm]
Access code: 0
P251 Zero position cylinder B
Zero position that is stored by the "Save zero position" function (control bit "save_zero").
This cylinder position can be approached by means of the "Go to zero positions" function
(control bit "move_zero").
Default: 900 [mm]
Access code: 0
P252 Zero position cylinder C
Zero position that is stored by the "Save zero position" function (control bit "save_zero").
This cylinder position can be approached by means of the "Go to zero positions" function
(control bit "move_zero").
Default: 900 [mm]
Access code: 0
P253 Zero position cylinder D
Zero position that is stored by the "Save zero position" function (control bit "save_zero").
This cylinder position can be approached by means of the "Go to zero positions" function
(control bit "move_zero").
Default: 900 [mm]
Access code: 0
422
min: 1 [mm]
min: -100000 [mm]
min: -100000 [mm]
min: -100000 [mm]
min: -100000 [mm]
max: 5000 [mm]
max: 100000 [mm]
max: 100000 [mm]
max: 100000 [mm]
max: 100000 [mm]
SC integrated STS, GSU
Operating Instructions, 07/2019, A5E48271265B AA