Commissioning Requirements For Addon Software; General Requirements - Siemens SIMOTION D4x5-2 DP/PN Operating Instructions Manual

Commissioning AddOn Software

9.3 Commissioning requirements for AddOn software

Figure 9-1
Whereas dashed connections (2) are only present during the diagnosis or commissioning, solid
connections are always present.
The Ethernet connection between the SIMOTION D variant and the SIMOCRANE CeCOMM
diagnostic program (3) requires a JAVA application. This JAVA application (Buffer.jar) and the
DCC_SCCOMMON block on the SIMOTION D control both the communication and the data
flow. For CeComm communication, two further files (JIMVOKE.xml, VMCONFIG.ini) are
needed.
Note
SIMOTION D
The JAVA application is not part of the SCOUT project, but is contained on the supplied DVD.
The customer must copy this application to the CF card of the SIMOTION D.
The continuous communication between the AddOn functions on the SIMOTION and the
camera measuring system (1) is not performed directly but using FB blocks (see also [Ref. 1]).
9.3 Commissioning requirements for AddOn software
9.3.1

General requirements

Commissioning of the drive system and all safety functions of the crane must be performed,
especially limit trips, safety interlocks, and EMERGENCY STOP functions, and these must be
fully functional.
320
Communication via Ethernet SIMOTION D
SC integrated STS, GSU
Operating Instructions, 07/2019, A5E48271265B AA