Menu Bar - Siemens SIMOTION D4x5-2 DP/PN Operating Instructions Manual

8.4

Menu bar

The individual menu bar items are explained in detail in the next section.
File
Open
You can open the following files with this function:
● Logger file (*.bin)
● CeCOMM config file
● Trace config file (*.ini)
Reload last chart
This function loads the last recorded chart from the target device.
Reload longtime traces
The stored longtime traces can be reloaded from the PC with this function.
Connect/disconnect network drive
You can use these menu items to connect or disconnect network drives.
Primary Setup Tool
The Primary Setup Tool is started using this menu item. The communication addresses of the
connected nodes can be determined by means of this tool.
View
The "View" menu function can be used to call all functions provided on the tabs.
Options
Save image content ...
This function saves the contents currently displayed on the "Monitor" tab to a text file.
Ping ...
Ping is a diagnostic tool which can be used to check whether a communication partner can be
reached via the set IP address.
Interface ...
This function can be used to set the communication interface or the IP address of the
SIMOCRANE CeCOMM diagnostic program on the "IP-Address" tab.
SC integrated STS, GSU
Operating Instructions, 07/2019, A5E48271265B AA
SIMOCRANE CeCOMM commissioning and diagnostic program
8.4 Menu bar
267