Siemens SIMOTION D4x5-2 DP/PN Operating Instructions Manual page 295

Short info
"Short info" displays the value at a particular time on a curve. The name of the curve and the
time are also displayed.
● To open the short info, click the left mouse button on the required curve while holding down
the Ctrl key. Click the left and right mouse buttons simultaneously to fix the short info on the
display.
● Click the left mouse button on the short info to close it.
● The time stamp can also be displayed using the dropdown list of the "Options" button on the
toolbar. The X axis then shows the exact time [hh:mm:ss:ms] instead of the trace duration
[s].
Measuring cursor
Use the measuring cursor to permit a more exact tracing of signals (specific bit has been set →
how does a specific quantity behave at this time) and to determine special points.
You can activate this as follows:
Click the "Options" button to open the dropdown list and select the option "Measuring cursor
ON". Or place the mouse pointer on the left edge of the screen and pull the measuring cursor
to the right while holding down the left mouse button.
Figure 8-28
SC integrated STS, GSU
Operating Instructions, 07/2019, A5E48271265B AA
SIMOCRANE CeCOMM commissioning and diagnostic program
Measuring cursor function – Activate measuring cursor
8.7 Diagram - trace function
295