Assignment Of Signal Names; Variable Signals - Siemens SIMOTION D4x5-2 DP/PN Operating Instructions Manual

Abbreviation Designation
ST Structured Text
STS Ship-to-shore
STW Control word
SW Software
TLS Trim/list/skew
TL positions Twistlock positions
TO Technology object
TPL Target position list
TR Trolley
UP Up
WS Waterside
ZSW Status word
A.4

Assignment of signal names

For reasons of compatibility, the signal names (designations of connection signals for DCC
blocks and ST function blocks) used in the software of the sway control system are not the
same as the names which appear in this document.
The designations used in the software are only named in those tables which specifically list the
connections of DCC blocks and ST function blocks.
The table below shows a comparison of the differences between signal names.
Table A-1 Assignment of signal names
Connection designation at
DCC block
BOM_SPEED
BOM_POS
BOM_HOIST_CONTROL
BOM_LOAD_POS
BOM_TROLLEY_POS
A.5

Variable signals

Variable signals
Index German name
0 Grenzwert.smax
1 Grenzwert.vmax
2 Grenzwert.amax
3 Achse.soll.Weg
4 Achse.soll.Geschw
SC integrated STS, GSU
Operating Instructions, 07/2019, A5E48271265B AA
Meaning
Container crane
Positions at which a container is locked or unlocked.
Technology object in SIMOTION; symbol for a moving axis
Signal name in the interface
description
MAN
POS
SAM
SNL
SND
English name
LimitValue.smax
LimitValue.vmax
LimitValue.a_max
Axis.reference.section
Axis.reference.velocity
Meaning
Operation mode "manual"
Operation mode "positioning"
Operation mode "semi-automatic mode"
Operation mode "sway neutralization load position"
Operation mode "sway neutralization drive position"
Description
Target position
Target velocity
Target acceleration
Set position
Set velocity
Appendix
A.5 Variable signals
437