Connection Examples; Digital Inputs; Figure 12: Connection Example For Switch At Input Di1 - WAGO -TO-PASS 761 Manual

34 Connect Devices
5.2

Connection Examples

Connect the shield connection to the DIN rail!
The shield connection of the TO-PASS
must be connected to the DIN rail. The DIN rail must have a low-impedance
ground (see section "Connections" > "Ground").
5.2.1

Digital Inputs

Only connect SELV/PELV voltages!
Only SELV/PELV voltages shall be connected to the device terminals.

Figure 12: Connection example for switch at input DI1

761-210 Telecontrol Module Compact
®
telecontrol module (shield, terminal 38)
WAGO-TO-PASS® 761
Manual
Version 2.0.0