Connection Examples; Digital Inputs; Figure 14: Connection Example For A Switch At Di1 Input - WAGO 761-114 Manual

40 Connect Devices
5.2

Connection Examples

Connect the shield connection to the DIN rail!
The shield connection of the TO-PASS
must be connected to the DIN rail. The DIN rail must have a low-impedance
ground (see section "Connections" > "Ground").
5.2.1

Digital Inputs

Only connect SELV/PELV voltages!
Only SELV/PELV voltages shall be connected to the device terminals.

Figure 14: Connection example for a switch at DI1 input

761-114 Telecontrol Module Compact, 2 AI, Web, MODBUS485
®
telecontrol module (shield, terminal 38)
WAGO-TO-PASS® 761
Manual
Version 1.0.0