Tab. 2.1.1-2: Sensor And Actuator Connectors - WAGO 751-5702 Manual

10 • AS-Interface Components
AS-Interface Module IP20

Tab. 2.1.1-2: Sensor and Actuator Connectors

Fig. 2.1.1-3: Sensor
Connectors
Fig. 2.1.1-4: Actuator
Connectors
Warning
The inputs are DC coupled with the AS-Interface voltage. They shall not be
supplied with an external supply voltage!
Warning
Connectors must only be mated or unmated in "No Load" condition!
2.1.1.3.3 Programming Connector
On the left side of the front plate is the programming connector. It is a plug for
a DC socket, which is compatible with all popular programming adapters, for
example Pepperl+ Fuchs VAZ-PK-1.5M-V1-G.
Please note manufacturer documentation for the operation of the programming
device.
X5 X6 X7 X8
X5 X7
X5 X6 X7 X8
X5
X6 X8
---
---
gqxxxx4x
---
X1 X3
X2 X4
gqxxxx7x
Sensor Connectors
Connector Pin
IN+
IN-
--- --- --- IN1
X6 --- --- IN2
--- X7 --- IN3
--- --- X8 IN4
Actuator Connectors
Connector Pin
X3 X4 OUT-
X3 --- OUT1
--- X4 OUT2
X3 --- OUT3
Function
Sensor supply L+
Sensor supply L–
Sensor signal
Sensor signal
Sensor signal
Sensor signal
Function
External power supply –
Switching output +
Switching output +
Switching output +
WAGO-I/O-SYSTEM 751
AS-Interface Components IP20