Connectors; Tab. 2.1.1-1: As-Interface Connectors; Tab. 2.1.1-2: Sensor Connectors - WAGO 751-3502 Manual

2.1.1.3 Connectors

2.1.1.3.1 AS-Interface Cables
The connections for AS-Interface cable are 4-pole male connectors for use
with female connectors from the Multi Connection System Mini.
The following table shows the pin assignment of the sockets.

Tab. 2.1.1-1: AS-Interface Connectors

Fig. 2.1.1-2: AS-
Interface Connectors
Warning
Connectors must only be mated or unmated in "No Load" condition!
2.1.1.3.2 Sensor Connectors
Sensor connections are 3-pole male connectors for use with female connectors
from the Multi Connection System Mini.
The following table shows the pin assignment of the sockets.

Tab. 2.1.1-2: Sensor Connectors

Fig. 2.1.1-3: Sensor
Connectors
WAGO-I/O-SYSTEM 751
AS-Interface Components IP20
X1 X3 X1
X2 X4
X1
gqxxxx5x
X5 X6 X7 X8
X5 X7
X5 X6 X7 X8
X5
X6 X8
---
---
gqxxxx4x
---
751-3502 [AS-Interface Module 4IN 24V A/B]
Connector Pin
--- ASI+
--- ASI-
Sensor Connectors
Connector Pin
IN+
IN-
--- --- --- IN1
X6 --- --- IN2
--- X7 --- IN3
--- --- X8 IN4
Connectors
Function
AS-Interface power supply +
AS-Interface power supply –
Function
Sensor supply L +
Sensor supply L -
Sensor signal
Sensor signal
Sensor signal
Sensor signal
• 9