Software Version - Omron K7GE-MG User Manual

5-11 Software Version

Level Characters
Initial
v1.0*
Setting
* The "1.0" part changes according to the current software version
Displays the current software version of the K7GE-MG.
This setting parameter only lets you see the software version. It cannot be changed.
The operation procedure for the Software Version setting parameter is shown as follows:
Procedure
1.
Press the Level Key for at least 3 seconds in the Operation
Level to move to the Initial Setting Level.
•
The LVL/CH display will indicate 0, and the LVL indicator will light
to show that the Initial Setting Level has been entered.
2.
Press the Mode Key several times to display V*.*.
3.
Press the Level Key for at least 1 second to return to the
Operation Level.
•
The LVL/CH display will indicate 1, and the CH indicator will light
to show that the Operation Level has been entered.
---- indicates measurement standby.
Insulation Resistance Monitoring Device User's Manual (N224)
Range of setting Default
values value
--- ---
5 Using Setting Parameters
Description
Displays the software version of the K7GE-MG
3 seconds
1 second
TRIG FIN
5
LVL
mxch
0
MANU ERR AGE
TRIG FIN
LVL
v!0
0
MANU ERR AGE
TRIG FIN
----
1
CH
MANU ERR AGE
5 - 23