Notifying The Other Party Of Your Phone Number; Caller Id Notification; Checking Your Own Phone Number; My Profile - NTT docomo FOMA SO706i Instruction Manual

Setting the main clock
i "SETTINGS" "Clock" "Set main
1
time" "Auto time adjust"
■ To set summer time
"Summer time"
When set to "ON", time is displayed with 1 hour added.
2 Select any item:
Auto......Adjusts the date and time of the main clock
automatically.
Auto......Adjusts the date and time
automatically based on the retrieved time
information and time zone information. Local
time appears during international roaming.
Manual(Time zone
to display the local time.
Manual(Date time set)......Set the date and time of
the main clock manually. Select a time zone, and
enter the date and time.
■ To enter the date and time
Use b to move the highlight, then use the dial keys
to enter the numbers.
N
After you set the date and time, you can use functions
such as "Alarm" or "Schedule" which manages the
date and time.
The adjustable range of the date and time is between
00:00 on January 1, 2004 and 23:59 on December 31,
2037.
<Auto time adjust>
Time is automatically adjusted e.g. when the power is
turned on with a FOMA card (UIM) inserted.
A several-second time lag may occur. Time may not
be adjusted depending on the signal status or i-αppli
set as the standby screen.
Time may not be adjusted depending on the overseas
carrier's network.
Setting the sub clock
i "SETTINGS" "Clock" "Set sub
1
clock" "display method"
■ To set summer time
"Summer time"
When set to "ON", time is displayed with 1 hour added.
2 Select any item:
Auto......Displays the sub clock automatically during
international roaming. If the main time "Auto time
adjust" is set to "Auto", the main time automatically
changes to the local time, but the Japan time
appears for the sub clock.
Always......Select a time zone to always display the
local time for the sub clock.
OFF......Hides the sub clock.
46
<Set main time>
set)......Select a time zone
<Set sub clock>
3 "YES" or "NO"
Select "YES" to display the sub clock.
If "OFF" is selected in Step 2, this step is skipped.
N
The sub clock appears only when "Size" under "Clock
display" is set to "Small".
If "Auto" is selected here and "GMT+09" is not
selected as time zone under "Set main time", the
Japan time appears for the sub clock (If the time zone
is "GMT+09", the sub clock does not appear in Japan.
Notifying the Other Party of
Your Phone Number
The FOMA terminal can send your phone number
(caller ID) to the other party's phone (Display) when
you make a call.
Since the phone number is important information,
please take care when you send your caller ID.
You cannot perform the setting when "
displayed.
i "SERVICE" "Caller ID
1
Notification" Select any item:
Activate/Deactivate......Sets whether to send your
caller ID or not.
Check setting......Checks the current Caller ID
Notification settings.
N
This function is available only when the other party's
phone is capable of displaying the caller ID.
If you hear a message requesting your caller ID, make
a call again after setting your caller ID activated.
Checking Your Own Phone
Number
You can display and check your phone number (own
number) stored in your FOMA card (UIM).
i0
1
N
You can easily quote the information stored in "My
Profile" when entering the owner information (such as
name or mail address) on websites, etc. →p.307
You can check your i-mode address by selecting
"i-mode menu" "iMenu" "English" "Options"
Settings" "Confirm Settings".
When 2in1 is in Dual mode, press c to switch the My
Profile display.
Reset My Profile in B mode when you exchange the
FOMA card (UIM) while using 2in1. →p.291
<Caller ID Notification>
" is
<My Profile>
"Mail