Receiving A Call - NTT docomo DM-01G Instruction Manual

Calling a mobile phone
From the Home screen, "Phone" u
a
"Dial" tab
• The "Dial" screen is displayed.
"010" u country code u recipient's
b
mobile phone number, and tap
Tap "End" to end a call
c
Note
• If a mobile phone number or an area code
of the other party begins with "0", remove
the irst "0". However, the irst "0" is
required when calling to some countries
or regions such as Italy.
• "+" (touch and hold down "0" to input "+")
and the former "009130-010" can also
be used to dial instead of "010".
• On "Dial" tab, enter a phone number
u "International call" u select
u
a country u "WORLD CALL" to add
"009130-010" + country code.
Calling
102

Receiving a Call

When there is an incoming call
a
• Tap u "On hold" to put a call on hold.
• You can press power key, volume key (up)
or volume key (down) during an incoming
call to stop the ringtone and vibration.
• Tap to answer via phone memo. If
you have set up a phone memo, without
tapping the phone memo will answer
your call after the time duration you set
beforehand.
"Activate" u "Accept"
b
• Declining a call : "Activate" u "Reject"
• Rejecting a call : "Activate" u "Reject call
with SMS" u tap a message to send
Tap "End" to end a call
c
Note
• From the Home screen, tap "Phone" u
u "Call settings" u "Reject SMS" to
edit a reject SMS.