Signal Quality - NTT docomo FOMA SO706i Instruction Manual

Setting the Keypad Tone
Setting this function to "OFF" also disables the
battery level tone and the warning tone.
The keypad sound is played at the level set in
"Volume" during a call, and fixed at the same level
while not talking on the phone.
i "SETTINGS" "Other settings"
1
"Keypad sound" "ON" or "OFF"
Setting the Confirmation Tone
for Charging
This function sets to emit a sound when charging
starts or is completed.
When the screen other than Standby screen is
displayed or when Manner mode or Public mode
(Driving mode) is set, the charge sound does not
ring.
i "SETTINGS" "Other settings"
1
"Charge sound" "ON" or "OFF"
Setting the Clock Alarm Tone
You can change the clock alarm tone for Alarm,
Schedule, To Do list and 1Seg booking program.
i "SETTINGS" "Clock" "Clock
1
Alarm Tone set" Select any item:
Select the alarm tone from "Melody/i-motion/
Music/Voice announce/OFF".
Setting the FOMA Terminal to
Warn You before a Call Drops
Out
The FOMA terminal emits an alarm tone to warn you
that the signal quality is deteriorating and the call is
likely to drop out.
The call may drop out without a warning tone if the
signal quality worsens very quickly.
i "SETTINGS" "Talk" "Quality
1
alarm" Select an alarm tone
Select the alarm tone from "No tone/High tone/
Low tone".
<Keypad sound>
<Charge sound>
<Clock Alarm Tone set>
<Quality alarm>
Setting the Ring Time for
Incoming Mail
You can set a ring time when you receive mail or a
MessageR/F.
i "SETTINGS" "Incoming call"
1
"Mail/Msg. ring time" Select an item
to set the ring time:
Select "Mail" to set the ring time for i-mode mail,
Area Mail and SMS.
"ON" Enter the ring time (01 to 30
2
seconds in 2 digits)
■ To turn off the ring tone
"OFF"
When "Vibrator" is activated, the vibration stops.
Enabling the Tone to Ring
through the Earphone and
Speaker
You can set the FOMA terminal to play the ring tone
or alarm notification through the earphones and
speaker when a flat-plug earphone/microphone with
switch (optional) is connected.
i "SETTINGS" "External
1
connection" "Headset usage setting"
"Headset+speaker" or "Headset only"
N
If "Ring volume" is set to "Silent", there is no sound
from the earphone or speaker.
When "Phone vol." and "Mail vol." in the Manner mode
(Original) is set to other than "Silent", the ring tone still
sound. However, Manner mode (Manner mode and
Super silent) is set, the ring tone sounds only from the
earphones.
<Mail/Msg. ring time>
<Headset usage setting>
85