Executing Set Data Communication - NTT docomo FOMA SO706i Instruction Manual

Specify a user ID and password,
5
select the accessible user and click
"次へ" (Next)
When " すべてのユーザー " (All users) is
selected in the "使用可能ユーザーの選択 "
(Selecting accessible user) column, the
connection setting is applied to all the users
registered in Windows.
When setting the user ID and password, input
the correct, case-sensitive data provided by the
service provider.
For Windows Vista
Specify the user ID and password and click
" 次へ " (Next)
Check the setting information and
6
click "完了" (Finish)
The contents of the settings are listed. Make
sure that all settings are correct.
Checking " デスクトップにダイヤルアップの
ショートカットを作成する " (Add dial-up
shortcut on desktop) automatically creates a
shortcut icon.
To change any setting, click " 戻る " (Back).
Click "OK"
7
Execute communication. → p.24

Executing Set Data Communication

Double-click the connection icon on the desktop
1
If the connection icon does not appear on the desktop, use the following procedure:
For Windows Vista
Open " " → " 接続先 " (Access point), select the access point and click " 接続 " (Connection)
For Windows XP
Open " スタート " (Start) → " すべてのプログラム " (All Programs) → " アクセサリ " (Accessories)
→ " 通信 " (Communication) → " ネットワーク接続 " (Network connections) → Open the access
point
For Windows 2000
Open " スタート " (Start) → " プログラム " (Programs) → " アクセサリ " (Accessories) → " 通信 "
(Communication) → " ネットワークとダイヤルアップ接続 " (Network and dialup connection) →
Open the access point
24