Multi Access - NTT docomo FOMA SO706i Instruction Manual

Multi Access

Multi access is a function that allows the 3
communication lines such as voice calls, packet
communication and SMS to be conducted at the
same time.
"Multi Access Combination Patterns" → p.360
The FOMA terminal can use the 3 communication
lines listed below at a time.
Voice call
Packet communication connected with
i-mode, i-αppli, i-mode mail and PC
SMS
N
Communication charges are applied for each of the
lines used during Multi access communication.
When you receive a call during
communication
● Receiving an i-mode mail during a voice
call
When you receive an i-mode mail during a voice call,
the in-call screen remains displayed while receiving
the i-mode mail. You can then read the i-mode mail
without interrupting your call.
i (MULTI) Select "
1
The reception result screen for the i-mode mail
appears.
Switching tasks → p.283
2 Checking the i-mode mail
Reading i-mode mail → p.170
i (MULTI) Select "
3
The screen changes to the voice call screen.
282
● Receiving a voice call during i-mode or
<Multi access>
When you receive a voice call while using i-mode,
receiving or sending an i-mode mail or using packet
communication with the FOMA terminal and PC
connected, the voice call ringing screen appears and
you can answer the call without ending i-mode or
packet communication.
<Example: When a voice call arrives during i-mode>
1
1 line
1 line
1 line
2
To use other type of communication
while communicating
You can use another type of communication without
interrupting your current communications.
(Transmission)"
● Making a voice call during i-mode
While connecting to i-mode or sending/receiving a
mail, you can make a voice call without ending
i-mode.
1
2
3
(Talking)"
packet communication
r
The In-call screen appears, and you can talk.
■ To return to the i-mode screen without
answering the voice call
i (MULTI) Select "
The caller hears ringing without a message.
To end the call, press y
The call is ended and the i-mode screen
reappears.
■ To return to the i-mode screen without
ending a voice call
i (MULTI) Select "
To switch screens during Multi access, select the
desired function on the task icon display area.
→ p.283
During i-mode i (MULTI) (1 second
or longer)
The standby screen appears.
Make a voice call
Making voice calls → p.48
To end the call, press y
The call is ended and the i-mode screen
reappears.
■ To return to the i-mode screen without
ending a voice call
i (MULTI) Select "
(Browser)"
(Browser)"
(Browser)"