Pppoe (Ppp Over Ethernet) - Avaya G450 Cli Reference Manual

Roadmap
Table 69: PPP encapsulation CLI commands (continued)
Root level command
show interfaces

PPPoE (PPP over Ethernet)

Table 70: PPPoE CLI commands
Root level command
interface
fastethernet
110 Avaya G450 CLI Reference
First level command
ppp timeout retry
First level command
encapsulation pppoe
ip address
ip address
negotiated
keepalive-track
mtu
ppp chap hostname
ppp chap password
ppp chap refuse
Description
Set the maximum time to wait for a response
during PPP negotiation
Display interface configuration and statistics
for a particular interface or all interfaces
Description
Enter the context of the FastEthernet
interface
Change the encapsulation to PPPoE
Configure an IP address and subnet mask for
the interface
Obtain an IP address via PPP/IPCP
negotiation
Bind interface status to an object tracker to
check whether the interface is up
Set the interface's MTU to 1492 which
ensures that overall packet size for the
PPPoE interface does not exceed 1500,
which is the MTU for Ethernet
Override the device hostname for PPP CHAP
authentication
Set the CHAP password for authentication
with a remote peer
Prevent the device from authenticating with
CHAP after the device is requested by the
remote peer
2 of 2
1 of 2