Reassembling; Installing The Top Cover - Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual

Basic hardware procedures
▶ Push green touch points inside (1).
▶ Push the top cover as far as it will go in the direction of the arrow (2).
▶ Lift off the top cover upward (3).
4.5

Reassembling

CAUTION
▶
Before attaching the covers, make sure no unnecessary parts or
tools are left inside the server.
▶
The top cover must be replaced as soon as possible for purposes
of cooling, to comply with EMC regulations (regulations regarding
electromagnetic compatibility) and to prevent fires.
▶
For more information, see
4.5.1

Installing the top cover

Figure 7: Installing the top cover
▶ Place the top cover on the server (1).
▶ Push the top cover as far as it will go in the direction of the arrow (2) until it
clicks in.
52
"Important information" on page
Upgrade and Maintenance Manual
29.
RX1330 M4