Basic hardware procedures
4.7
Reassembling
4.7.1
Safety notes
CAUTION
▶
Before attaching the covers, make sure no unnecessary parts or
tools are left inside the server.
▶
Before switching on the server, make sure the side cover is closed.
In order to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and satisfy cooling requirements, the
server must not run while the side cover is removed.
▶
For more information, see
4.7.2
Inserting in the system board tray
Figure 16: Installing the system board tray
▶ Carefully push the system board tray back.
50
"Important information" on page
Upgrade and Maintenance Manual
25.
TX1310 M5