Removing The Irmc Microsd Card - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

14.4.2 Removing the iRMC microSD card

Upgrade and Repair Unit
(URU)
Tools: a pair of side-cutting pliers
14.4.2.1 Preliminary steps
"Shutting down the server" on page 52
Ê
"Disconnecting the power cord" on page 53
Ê
"Getting access to the component" on page 54
Ê
Ê If applicable, remove the riser module, see section
module" on page
14.4.2.2 Removing the iRMC microSD card
Figure 306: Removing the iRMC microSD card
Ê To eject the iRMC microSD card, gently push it in and then let go (1).
Ê Pull the iRMC microSD card straight out of its slot (2).
V
CAUTION!
The iRMC microSD card contains customer information. After removing
the iRMC microSD card, hand the card over to the customer.
TX2550 M4
84.
Upgrade and Maintenance Manual
System board and components
Hardware: 5 minutes
"Removing the riser
429