Removing The Irmc Microsd Card - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

▶ With the label facing up, insert the iRMC microSD card into the microSD
card slot (1) until it locks in place (2).
The onboard position of the microSD card slot can be found in
"Connectors and indicators on the system board" on page
Concluding steps
▶ Install the system fan module, see
page 85.
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
14.5.3

Removing the iRMC microSD card

Upgrade and Repair Unit
(URU)
Tools: tool-less
Preliminary steps
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the system fan module, see
page 82.
TX1330 M4
"Installing the system fan module" on
66.
79.
81.
47.
"Removing the system fan module" on
Upgrade and Maintenance Manual
System board and components
Hardware: 5 minutes
48.
50.
494.
429