Removing The Front Panel Module - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

13.1.2 Removing the front panel module

Removing front panel cables from the system board
Figure 290: Disconnecting the front panel cables
Ê Disconnect the front panel cable from the system board (1).
Ê Disconnect the front USB cable from the system board (2).
Ê Remove all front panel cables from the cable guide (3).
Removing the front panel module
I
Unlocking and securing the front panel is illustrated by the example of the
rack model. In case of floorstand models, the accessible drive locking bar
is located on the top of the drive bay. For more information, see section
"Opening the accessible drive locking bar" on page
TX2550 M4 Upgrade and Maintenance Manual
Front panel
94.
407