Xerox WorkCentre 5790 Series Service Manual page 215

A
• P/J10, IOT PWB.
• 01G +24 V Distribution RAP.
• 01B 0V Distribution RAP.
Install new components as necessary.
• Feed solenoid, PL 7.30 Item 4.
• Perform OF7 IOT PWB Diagnostics RAP before a new IOT PWB is installed,
1.10 Item 2.
Perform the following:
• Ensure that the customer is not filling the tray above the max fill line.
• Clean the feed roll and retard pad with a cloth dampened with water.
• If necessary install a new feed roll and retard pad assembly,
Feed solenoid
SOL08-050
PJ636
PJ36
Width sensor
guide Q07-350
Figure 1 Component location
Xerox® WorkCentre® 5790 Family
PL
PL 7.30 Item 21.
Feed roll
Tray empty sensor
Q07-335
May 2013
Figure 2 Circuit diagram
2-183
Status Indicator RAPs
07D