63A9, Position Range Limit Inc With Remainder Is Not Supported For Secondary Feedback - Beckhoff AX8000 User Information

6.48 63A9, Position range limit Inc with remainder is not
supported for secondary feedback.
The position range limit is scaled internally to encoder increments. This calculation result contains a
remainder, which is not supported for the secondary feedback.
Diagnostic Code (Hex.)
63A9
Class
Error
Standard Reaction
Axis is inoperable
Possible Causes
The position range limit is scaled internally to encoder
increments. This calculation result contains a
remainder, which is not supported for the secondary
feedback.
Internal: 0x63A9, Position range limit Inc with remainder is not supported for secondary feedback.
Multi axis servo system - AX8000
Diagnostic Code (Dez.)
25513
Type
Error
Reset
Execute Reset-Command (Fault reset).
Solutions
Please check the position range limit and the factor
group parameters of this feedback.
Version: 1.1
Diagmessages of module AxisMain
147