6.30
6397, additional Factor Group Parameters: Feed
constant illegal shaft revolutions
The actual combination of the factor group Parameters is not allowed for this Device.
Diagnostic Code (Hex.)
6397
Class
Error
Standard Reaction
Axis is inoperable
Possible Causes
The additional feed constant - shaft revolutions
contains an illegal value (Object 0x60EE/1 ChA or
0x68EE/1 ChB).
Internal: 0x6397, additional Factor Group Parameters: Feed constant illegal shaft revolutions
Multi axis servo system - AX8000
Diagnostic Code (Dez.)
25495
Type
Error
Reset
Execute Reset-Command (Fault reset).
Solutions
Please set value to '1'.
Version: 1.1
Diagmessages of module AxisMain
129