Standard-Messages
3.34
A002, Transition Pre-Op to Safe-Op not successful.
Sync Manager Settings Error.
Diagnostic Code (Hex.)
A002
Class
Error
Standard Reaction
Axis is inoperable
Possible Causes
The Parameters of the CoE Communication Objects
do not fit the Sync Manager Parameters.
Internal: 0xA002, Transition Pre-Op to Safe-Op not successful. Sync Manager %u Settings Error. 0x%x
48
Diagnostic Code (Dez.)
40962
Type
Error
Reset
Execute Reset-Command (Fault reset).
Solutions
Please check, if you are working with the right
EtherCAT Device Description XML-File.
Version: 1.1
Multi axis servo system - AX8000