4310, Drive Overtemperature Shut Down - Beckhoff AX8000 User Information

6.12

4310, Drive overtemperature shut down

The drive temperature has reached a critical value.
Diagnostic Code (Hex.)
4310
Class
Error
Standard Reaction
Closed loop ramp
Possible Causes
The ambient temperature is too high
The fan is defective
Internal brake power and power loss of axis are too
high
The cooling slots or the measuring sensors are
polluted
Internal: 0x4310, Drive overtemperature shut down
Multi axis servo system - AX8000
Diagnostic Code (Dez.)
17168
Type
Drive overtemperature shut down
Reset
Execute Reset-Command (Fault reset).
Solutions
Cool down the ambient temperature
Check the fan
Lower the brake power and power loss of axis
Clean the cooling slots and the measuring sensors
Version: 1.1
Diagmessages of module AxisMain
111