8782, Configured Sync1 Cycle Time Is Not A Multiple Of The Sync0 Cycle Time - Beckhoff AX8000 User Information

4.13 8782, Configured Sync1 Cycle Time is not a multiple of
the Sync0 Cycle Time
The configured Sync1 Cycle Time is not a multiple of the Sync0 Cycle Time.
Diagnostic Code (Hex.)
8782
Class
Error
Standard Reaction
Axis is inoperable
Possible Causes
The Cycle Time of your NC-Task has to be a multiple
of the drives Sync0 Cycle Time.
Internal: 0x8782, Sync Controller: Configured Sync1 Cycle Time (%u ns) is not a multiple of the Sync0 Cycle
Time (%u ns).
Multi axis servo system - AX8000
Diagmessages of module DeviceMain
Diagnostic Code (Dez.)
34690
Type
Error
Reset
Execute Reset-Command (Fault reset).
Solutions
Please set your Task to a valid Cycle Time.
Version: 1.1 95