A041, Dynpdo Mapping Warning: Oversampling Is Not Allowed - Beckhoff AX8000 User Information

Standard-Messages
3.62 A041, DynPdo Mapping Warning: Oversampling is not
allowed.
Oversampling is not allowed for the mentioned Object.
Diagnostic Code (Hex.)
A041
Class
Warning
Standard Reaction
No
Possible Causes
The mapping parameters contain oversampling for an
object which doesn't support oversampling.
Internal: 0xA041, DynPdo Mapping Warning: Oversampling is not allowed for Object 0x%x/%x
(SyncManager %u).
76
Diagnostic Code (Dez.)
41025
Type
Warning
Reset
Warning: No reset required.
Solutions
Please check, your mapping Configuration.
Version: 1.1 Multi axis servo system - AX8000