6.38
639F, Scaling index object does not fit the Factor
group parameters for the second Encoder
The actual combination of the factor group Parameters is not allowed for this Device.
Diagnostic Code (Hex.)
639F
Class
Error
Standard Reaction
Axis is inoperable
Possible Causes
The mentioned scaling index object doesn't represent
the factor group settings of the second encoder.
Internal: 0x639F, Scaling index object 0x%x does not fit the Factor group parameters for the second Encoder
Multi axis servo system - AX8000
Diagnostic Code (Dez.)
25503
Type
Error
Reset
Execute Reset-Command (Fault reset).
Solutions
Please compare the selected scaling to your
additional factor group settings.
Version: 1.1
Diagmessages of module AxisMain
137