Additional Factor Group Parameters: Position Encoder Resolution Illegal Encoder Increments - Beckhoff AX8000 User Information

Diagmessages of module AxisMain
6.33 639A, additional Factor Group Parameters: Position
encoder resolution illegal encoder increments
The actual combination of the factor group Parameters is not allowed for this Device.
Diagnostic Code (Hex.)
639A
Class
Error
Standard Reaction
Axis is inoperable
Possible Causes
The additional position encoder resolution - encoder
increments contains an illegal value (Object 0x60E6/1
ChA or 0x68E6/1 ChB).
Internal: 0x639A, additional Factor Group Parameters: Position encoder resolution illegal encoder
increments
132
Diagnostic Code (Dez.)
25498
Type
Error
Reset
Execute Reset-Command (Fault reset).
Solutions
Please compare it to your encoder values.
Version: 1.1 Multi axis servo system - AX8000