12.3
3182, Velocity actual Value raised above the max
channel accepted velocity
Velocity actual Value raised above the max channel accepted velocity
Diagnostic Code (Hex.)
3182
Class
Error
Standard Reaction
Closed loop ramp
Possible Causes
Velocity actual Value raised above the max channel
accepted velocity
Internal: 0x3182, Velocity actual Value raised above the max channel accepted velocity
Multi axis servo system - AX8000
Diagmessages of module TorqueControl
Diagnostic Code (Dez.)
12674
Type
Overspeed error
Reset
Execute Reset-Command (Fault reset).
Solutions
Reduce your target velocity.
Version: 1.1
187