Diagmessages of module Interpolator
7
Diagmessages of module Interpolator
7.1
6386, Parameter Interpolator: Illegal NC-Task cycle
time
Parameter Interpolator: To low NC-Task cycle time for this interpolation sub mode select. The feed forward
control may not work as expected.
Diagnostic Code (Hex.)
6386
Class
Warning
Standard Reaction
No
Possible Causes
Parameter Interpolator: To low NC-Task cycle time
for this interpolation sub mode select.
Internal: 0x6386, Parameter Interpolator: Illegal NC-Task cycle time
168
Diagnostic Code (Dez.)
25478
Type
Warning
Reset
Warning: No reset required.
Solutions
Adjust NC-Task cycle time.
Version: 1.1
Multi axis servo system - AX8000