Diagmessages of module AxisMain
6.21
6183, Internal Watchdog Error
Diagnostic Code (Hex.)
6183
Class
Error
Standard Reaction
Closed loop ramp
Possible Causes
To much objects in the PDO-mapping.
An unknown hard- or software error has occurred.
Internal: 0x6183, Internal Watchdog Error
120
Diagnostic Code (Dez.)
24963
Type
Error
Reset
Execute Reset-Command (Fault reset).
Solutions
Check the number of objects in the PDO-mapping.
Disconnect the power supply module from the mains
(including the 24 V power supply) and start a new
attempt. If this error occurs repeatedly, please call
the Beckhoff support that is responsible for you.
Version: 1.1
Multi axis servo system - AX8000