6.4
2381, Continuous over current (device output side)
Phase V
The drive software detected an overcurrent on the motor phases V.
Diagnostic Code (Hex.)
2381
Class
Error
Standard Reaction
Torque off
Possible Causes
Short circuit in the motor cable.
Short circuit in the motor winding.
Internal: 0x2381, Continuous over current (device output side) Phase V
Multi axis servo system - AX8000
Diagnostic Code (Dez.)
9089
Type
Overcurrent error
Reset
Execute Reset-Command (Fault reset).
Solutions
Check the motor cable
Check the motor winding with an high voltage test or
check the winding resistance.
Version: 1.1
Diagmessages of module AxisMain
103