13.5
6388, Parameter Torque Control: The value in object is
higher then the motor peak current
The rated current is higher then the motor peak current.
Diagnostic Code (Hex.)
6388
Class
Error
Standard Reaction
Axis is inoperable
Possible Causes
Something is wrong with the parameters in this
object.
Internal: 0x6388, Parameter Torque Control: The value in object 0x%x/%x is higher then the motor peak
current (0x%x/%x).
Multi axis servo system - AX8000
Diagmessages of module ActiveFrontEnd
Diagnostic Code (Dez.)
25480
Type
Error
Reset
Execute Reset-Command (Fault reset).
Solutions
Please check the parameters of the mentioned
object.
Version: 1.1
197