6391, Factor Group Parameters: Feed Constant Illegal Shaft Revolutions - Beckhoff AX8000 User Information

6.24 6391, Factor Group Parameters: Feed constant illegal
shaft revolutions
The actual combination of the factor group Parameters is not allowed for this Device.
Diagnostic Code (Hex.)
6391
Class
Error
Standard Reaction
Axis is inoperable
Possible Causes
The feed constant - shaft revolutions contains an
illegal value (Object 0x6092/2 ChA or 0x6892/2 ChB).
Internal: 0x6391, Factor Group Parameters: Feed constant illegal shaft revolutions
Multi axis servo system - AX8000
Diagnostic Code (Dez.)
25489
Type
Error
Reset
Execute Reset-Command (Fault reset).
Solutions
Please set value to '1'.
Version: 1.1
Diagmessages of module AxisMain
123