3.61
A03F, DynPdo Mapping Warning: Invalid Oversampling
Factor.
The oversampling factor of the mentioned Object is not possible.
Diagnostic Code (Hex.)
A03F
Class
Warning
Standard Reaction
No
Possible Causes
The Number of samples is higher than the Sync1/
Sync0 ratio.
Sync1/Sync0 ratio divided through the number of
samples is not integer.
Internal: 0xA03F, DynPdo Mapping Warning: Invalid Oversampling Factor (%u) Object 0x%x/%x
(SyncManager %u).
Multi axis servo system - AX8000
Diagnostic Code (Dez.)
41023
Type
Warning
Reset
Warning: No reset required.
Solutions
Please check, your mapping Configuration.
Please check, your mapping Configuration.
Version: 1.1
Standard-Messages
75