Multi-Feedback - Beckhoff AX8000 Series Operating Instructions Manual

Multi-feedback

9.9
EnDat 2.2 or BiSS C
9.9.1
Cables
Version: 1.1
An optional interface is available for the AX8xxx-0x10 modules.
You have the possibility to use the optional interface EnDat 2.2 and
BiSS C in the following cases:
• As a commutation encoder, for example with linear motors
• As an external second feedback for position optimization
• In combination with two feedbacks: EnDat 2.2 or BiSS C
► Remove cover 1
1
The D-Sub connectors 1 and 2 are exposed.
► Connect feedback
1+2
The connectors are angled upwards. If the connectors are con-
nected correctly, the cables can only be guided upwards.
► Guide cable 1 upwards
The following cable is available for the feedback system EnDat 2.2 /
22 with M12 connection:
• ZK4810-0020-zzzz
Electrical installation
AX8000 ─── 71