Diagmessages of module AxisMain
6.29
6396, additional Factor Group Parameters: Feed
constant illegal feed
The actual combination of the factor group Parameters is not allowed for this Device.
Diagnostic Code (Hex.)
6396
Class
Error
Standard Reaction
Axis is inoperable
Possible Causes
The additional feed constant - feed contains an illegal
value (Object 0x60E9/1 ChA or 0x68E9/1 ChB).
Internal: 0x6396, additional Factor Group Parameters: Feed constant illegal feed
128
Diagnostic Code (Dez.)
25494
Type
Error
Reset
Execute Reset-Command (Fault reset).
Solutions
x
Please use a 2
value (x from 16 to 28) for rotary
encoders and a 10
encoders.
Version: 1.1
x
value (x from 0 to 9) for linear
Multi axis servo system - AX8000