6387, Parameter Motor. The Configured Dclink Max Voltage Is Higher Then The Motor Max Voltage - Beckhoff AX8000 User Information

Diagmessages of module SyncServoMotor
16.2 6387, Parameter Motor. The configured DCLink Max
Voltage is higher then the Motor Max Voltage.
The configured DCLink Max Voltage is higher then the Motor Max Voltage.
Diagnostic Code (Hex.)
6387
Class
Error
Standard Reaction
Closed loop ramp
Possible Causes
Something is wrong with the parameters in this
object.
Internal: 0x6387, Parameter Motor. The configured DCLink Max Voltage is higher then the Motor Max
Voltage.
214
Diagnostic Code (Dez.)
25479
Type
Error
Reset
Execute Reset-Command (Fault reset).
Solutions
Please check the parameters of the mentioned
object.
Version: 1.1 Multi axis servo system - AX8000