Diagmessages of module DeviceMain
4.6
5183, Power supply controlword, NC handling order
The power supply device is in an error state and sent a NC handling order to the connected Axes.
Diagnostic Code (Hex.)
5183
Class
Error
Standard Reaction
Nc handling
Possible Causes
Something went wrong in the power supply device.
Internal: 0x5183, Power supply controlword, NC handling order
88
Diagnostic Code (Dez.)
20867
Type
Error
Reset
Execute Reset-Command (Fault reset).
Solutions
Please check the messages of the power supply
device.
Version: 1.1
Multi axis servo system - AX8000