6.18
5443, Loss of the hardware enable
The configured hardware enable input has been deactivated by an external event, even though the AX8000
was under control.
Diagnostic Code (Hex.)
5443
Class
Error
Standard Reaction
Closed loop ramp
Possible Causes
Problems with the digital inputs
Internal: 0x5443, Loss of the hardware enable
Multi axis servo system - AX8000
Diagnostic Code (Dez.)
21571
Type
Error
Reset
Execute Reset-Command (Fault reset).
Solutions
Check the digital inputs
Version: 1.1
Diagmessages of module AxisMain
117