Diagmessages Of Module Simulationrotary; 63Ac, Encoder Simulation Is Not Supported For The Selected Motor Type - Beckhoff AX8000 User Information

15

Diagmessages of module SimulationRotary

15.1 63AC, Encoder simulation is not supported for the
selected motor type
Diagnostic Code (Hex.)
63AC
Class
Error
Standard Reaction
Axis is inoperable
Possible Causes
The selected module in the motor slot is not
supported for encoder simulation.
Internal: 0x63AC, Encoder simulation is not supported for the selected motor type. (ModuleIdent 0x%X)
Multi axis servo system - AX8000
Diagmessages of module SimulationRotary
Diagnostic Code (Dez.)
25516
Type
Error
Reset
Execute Reset-Command (Fault reset).
Solutions
Select another encoder type or no encoder.
Version: 1.1 211