Diagmessages of module VelocityControl
9.3
8480, Overspeed error
The speed of the axis is higher than the parameterized maximum value in the Velocity error tolerance Object
Diagnostic Code (Hex.)
8480
Class
Error
Standard Reaction
Closed loop ramp
Possible Causes
The speed of the axis is higher than the
parameterized maximum value in the Velocity error
tolerance Object
Internal: 0x8480, Overspeed error
176
Diagnostic Code (Dez.)
33920
Type
Overspeed error
Reset
Execute Reset-Command (Fault reset).
Solutions
Raise the velocity error tolerance or reduce your
target velocity.
Version: 1.1
Multi axis servo system - AX8000