63A5, Offset Additional Position Actual Value: No Position Offset Existing In Source 'Drive Memory - Beckhoff AX8000 User Information

6.44 63A5, Offset additional position actual value: No
position offset existing in source 'drive memory'
There is no secondary position offset stored, for the selected source 'drive memory'.
Diagnostic Code (Hex.)
63A5
Class
Error
Standard Reaction
Axis is inoperable
Possible Causes
A position offset should used in the position control
loop, but no position offset has been saved.
Internal: 0x63A5, Offset additional position actual value: No position offset existing in source 'drive memory'
Multi axis servo system - AX8000
Diagnostic Code (Dez.)
25509
Type
Error
Reset
Execute Reset-Command (Fault reset).
Solutions
Calibrate the axis and save the new position offset.
Version: 1.1
Diagmessages of module AxisMain
143