Front Differential Unit Components; Front Differential Dismounting And Remounting - Suzuki Grand Vitara 2011 Manual

3B-3 Differential: Front

Front Differential Unit Components

3
(a)
1. Front differential
2. Right mounting bracket
3. Right mounting bolt
4. Differential mounting bolt

Front Differential Dismounting and Remounting

Dismounting
1) Lift up vehicle and drain front differential oil.
2) Remove front drive shafts referring to "Front Drive
Shaft Assembly Removal and Installation: Front in
Section 3A".
3) Remove front suspension frame with front differential
referring to "Front Suspension Frame, Stabilizer Bar
and/or Bushings Removal and Installation in Section
2B".
4) Remove mounting bolts (1), and then take off front
differential from front suspension frame (2).
1
1
2
7 (b)
5
5. Rear mounting bolt
6. Rear mounting bracket
7. Right mounting bracket bolt
8. Rear mounting bracket bolt
S6JB0A3216003
2
I5JB0A321002-01
1
(a)
6
8 (b)
Remounting
Reverse dismounting procedure for remounting noting
the following.
• Tighten each bolts and nuts referring to "Front
Differential Unit Components: Front", "Front Drive
Shaft Components: Front in Section 3A" and "Front
Suspension Frame, Stabilizer Bar and/or Bushings
Components in Section 2B".
• Fill front differential oil referring to "Front Differential
Oil Change: Front".
4
(a)
5
(a)
: 85 N⋅m (8.5 kgf-m, 61.5 lb-ft)
: 50 N⋅m (5.0 kgf-m, 36.5 lb-ft)
S6JB0A3216002
I6JB0A321002-01