Table of Contents
Advertisement
8. Remove the power steering gear bolts (1).
9. Remove the power steering gear through the left
wheel house area.
10. Transfer any parts as needed.
Installation Procedure
1. Position the power steering gear into the vehicle
through the left wheel house area.
CAUTION
!
Refer to "Fastener Notice: ".
2. Install the power steering gear bolts (1).
Tightening torque
Tighten to 110 N⋅m (81 lb ft).
Power Assisted Steering System:
3. Install the power steering gear hoses bracket bolt
(1).
Tightening torque
Tighten to 9 N⋅m (80 lb in).
NOTE
New O-Ring seals must be used to avoid
potential leaks.
4. Connect the power steering gear inlet hose (2) and
the power steering fluid cooler hose (1) to the power
steering gear.
Tightening torque
Tighten to 25 N⋅m (18 lb ft).
6C-23
Advertisement
Table of Contents
Troubleshooting
