Table of Contents
Advertisement
5A-338 Automatic Transmission:
Holding Fixture Removal
Special tool
DT-48355 Holding Fixture
1. Loosen the bolt (2) holding the bracket to the fixture
body.
2. Remove the bracket bolt (3) from the transaxle.
3. Remove the 2 bolts (1) holding the fixture to the
transaxle.
4. Remove the DT-48355 from the transaxle.
5. Install the transmission vent pipe (812).
6. Install the vent hose (814).
Reference: "Torque Converter Assembly Installation".
Torque Converter Assembly Installation
1. Install the torque converter.
2. Measure dimension C.
3. If dimension C is not within specifications, rotate the
torque converter to index it to the pump.
Installation Height
Dimension C should be 11.35 mm (0.447 in).
Advertisement
Table of Contents
Troubleshooting
