Suzuki XL7 2007 Service Manual page 1733

No. 2 Rear Control Valve Body Disassemble
Reference: "Control Valve Body Assembly
Disassemble".
WARNING
!
Valve springs can be tightly compressed.
Use care when removing retainers and plugs.
Personal injury could result.
1. Remove the gasket (327).
2. Remove the rear control valve body assembly
spacer plate (328).
3. Remove the gasket (329).
4. Remove the TCC check valve (450).
5. Remove the TCC check valve spring (449).
6. Remove the 2 accumulator check valve assemblies
(353).
Automatic Transmission:
7. Remove the sleeve/bore plug retainer (459).
8. Remove the reverse shift restrict ball check valve
bushing - outer (453).
9. Remove the reverse shift restrict ball check valve
(452).
10. Remove the reverse shift restrict ball check valve
bushing - inner (451).
11. Remove the sleeve/bore plug retainer (458).
12. Remove the lock up control valve sleeve (457).
13. Remove the lock up control valve spring (456).
14. Remove the lock up control valve plunger (455).
15. Remove the lock up control valve (454).
5A-323