Suzuki XL7 2007 Service Manual page 1593

No Response to Movement of Shift Lever
Condition
DEFINITION: No response to movement of shift lever
Gear Selector Assembly
Gear Selector Cable
Manual Shift Shaft and Detent
Lever Assembly (710)
Manual Shift Shaft and Detent
Lever Spring and Roller Assembly
(711)
Manual Valve Link (336)
Transmission Attempts to Move but Appears Locked Up
Condition
DEFINITION: Transmission attempts to move but appears locked up
Parking Pawl Actuator Rod (709)
Vibration at Idle
Condition
DEFINITION: Vibration at base idle.
Engine and or Transaxle mounts
Exhaust System
Drivetrain "grounded out" to or on
the vehicle chassis
Drive Axles
Engine Flexplate
Base Engine
Vibration While Driving
Condition
DEFINITION: Vibration while driving.
• Lack of automatic transmission
fluid (ATF)
• Burnt ATF
• Incorrect ATF
• ATF contaminated with engine
coolant
Engine and/or Transaxle mounts
Drivetrain "grounded out" to the
vehicle chassis
Drive Axles
Exhaust System
Tires
Engine Flexplate
Base Engine
Internal transaxle concern
Gear selector assembly mechanically broken or not connected to cable
assembly
• Cable not connected to the gear selector assembly or to the manual shift
shaft and detent lever assembly (710)
• Cable broken internally
• Not installed
• Shaft broken
• Not installed
• Mechanically broken, or mounting bolts (712, 715) not installed or loose
• Not installed
• Not connected to the manual shift shaft assembly (710)
• Not installed
• Not installed correctly inside transmission assembly
Inspect the engine and or transaxle for loose, damaged or missing mounts.
Repair as necessary.
Inspect the complete exhaust system for proper installation and/or damage.
Inspect the compete drive-train for signs of physical contact. Correct as
necessary.
Inspect both drive axles for proper installation and/or damage. Repair as
necessary.
Inspect the flexplate for damage, excessive run-out. Correct as necessary.
Inspect the engine for any base level concerns. Repair as necessary.
Perform an ATF fluid inspection and correct as necessary. Refer to
"Transmission Fluid Check".
Inspect the engine and/or transaxle for loose, damaged or missing mounts.
Repair as necessary.
Inspect the compete drivetrain for signs of physical contact. Correct as
necessary.
Inspect both drive axles for proper installation and/or damage. Repair as
necessary.
Inspect the complete exhaust system for proper installation and/or damage.
Inspect all four tires for signs of cupping or irregular wear pattern.
Inspect the flexplate for damage, excessive run-out. Correct as necessary.
Inspect the engine for any base level concerns. Repair as necessary.
Remove the transaxle assembly and disassemble. Repair as necessary.
Automatic Transmission:
Action
Action
Action
Action
5A-183